Displaying 501 to 550 (of 966 Products)
| |
Item Name |
Model |
Price |
 |
Made in the USA! |
#5070 |
$1.5000 |
 |
Made in the USA! |
#5070A |
$0.3500 |
 |
Made in Maine! |
#5070C |
$0.5500 |
 |
Tenon is 7/16'' Diameter x 1/2'' Long |
#5072 |
$0.5000 |
 |
The size of the hole is 1/8" Tenon is 7/16'' Diameter x 1/2'' Long |
#5072D |
$0.7900 |
 |
Dimensions: Lobster buoy body - 7/8" Diameter x 1-1/4" Tall. Shafts are 3/16" Diameter x 2" Long. Overall length including shaft/handle is 2-25/32'' (a little more than 2&3/4'') Get yours and paint with your personal colors just like the real-life lobster-men do! They all have their own personal colors so not to mix up with other lobster-men's buoys. ... |
#5074 |
$0.9900 |
 |
Dimensions: Lobster buoy body - 7/8" Diameter x 1-1/4" Tall. Shafts are 3/16" Diameter x 1-11/16" Long. The shaft has a 3/8" bulb/round knob at the end. It is actually our #120 wood tie pegs that's installed in the buoy instead of the usual straight wood shaft. The buoy part is made in Maine while the handle alternates between made in the USA and imported. |
#5074B |
$0.9900 |
 |
Note: Diameters on this short wood dowel may be a hair over (or under) 3/16". An excellent item to pair with our #3064 Wood Toy Steering Wheels or any other item that uses a 3/16" hole. Birch. Imported. |
#5074H |
$0.1000 |
 |
|
#5076 |
$0.4000 |
 |
Be different and get this one! Tall and thin compared to the usual roundish wood snowman... Back in stock due to popular demand! |
#5082A |
$1.3900 |
 |
Sold Individually. This finial is mostly used as a flagpole top. Hole size may vary slightly. Some sanding may be required to make it fit a 1" dowel. The hole size averages 15/16" to 1". Average hole depth = 1-3/8" (1.375") to 1-11/32" (1.343") Deep. Hardwood Maple. Imported. |
#5083 |
$2.2500 |
 |
Sold Individually. Dimensions: 2-7/32" tall x 1-3/4" Wide (base and body) Hole: 31/32" (just a little bit UNDER 1") Diameter x 1-13/16" Deep Hardwood Maple. Made in Maine! |
#5083SMS |
$0.7500 |
 |
Hardwood Maple - Made in Maine |
#5089 |
$1.3000 |
 |
Our largest stock wood ball! This ball is made from laminated pieces of Poplar wood which may have a slightly "greenish" tint to it. Made in Maine, USA. |
#5090 |
$25.0000 |
 |
Dimensions: 1-1/2" Outer Diameter x 13/16" Inner Diameter x 3/8" Thick. Imported. |
#5093 |
$0.3500 |
 |
Dimensions: Bowl: 2-3/4" Diameter x 2-1/2" Tall. Pestle: 1-1/16" Diameter x 3-15/16" Long. Made in Maine, USA. |
#5096 |
$7.9900 |
 |
The helmet itself measures at about 1" diameter. Imported. The base/body is 13/16'' in diameter (+/-) |
#5097 |
$0.5500 |
.JPG "17-3/8\" Furniture Spindle") |
Often used to make chairs, particularly for the back part of the chair. Dimensions: 17-3/8" Long x 7/8" Diameter x 3/8" Tenon. (length includes tenons) The current stock is milled from Maple. |
#5098 |
$5.2500 |
 |
Milled from Hardwood Maple. Imported. |
#5099 |
$5.5000 |
 |
Fits a 1/2" Hole. Imported. |
#50A |
$0.1000 |
 |
Fits a 1/2" Hole-1/8" Shank. Birch. Imported. |
#50B |
$0.0700 |
 |
Fits in a 3/8" hole. 31/64'' Outside diameter (just a little under 1/2'') Birch. Imported. |
#51 |
$0.0600 |
 |
Imported. |
#51A |
$0.0800 |
 |
Fits in a 3/8" Hole. Birch. Imported. |
#51SP |
$0.0600 |
 |
3/8" Round Head Plug with Rounded head and Tapered sides. Fits a 3/8" Hole. Birch. Imported. |
#52 |
$0.0500 |
 |
3/8" Round Head Plug with a Rounded head and Tapered sides. Fits a 3/8" hole. Imported. |
#52A |
$0.1000 |
 |
1/2" Birch Wood Round Head Plug with a rounded head and tapered sides. Fits 1/2" Hole. Imported. |
#53 |
$0.0500 |
 |
Dimensions: 1-5/8" Long x 1/2" Wide (head) with a 5/16" Diameter Tenon. Tenon length 1-9/16". Assembly Tip: To install this axle peg, drill a 5/16" hole then put the axle peg thru the wheel; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the wheel itself, so that the wheel can turn! This axle peg fits... |
#56 |
$0.1400 |
 |
Dimensions: 1-3/8" Long (overall) with a 3/8" wide head. Axle shaft is 7/32" diameter x 1-7/32'' in Length. To install this axle peg, drill a 7/32" hole (or a 15/64" hole -15/64'' will give you a little more "wiggle room" for glue) for proper fit then put the axle peg thru the wheel, then dip the axle peg tip (already through the wheel) into some glue (not the whole thing),... |
#57 |
$0.0800 |
 |
Dimensions: 11/16" Long x 3/8" Wide (at the head) x 7/32" Tenon. Axle Shaft length = 15/32'' (a little under 1/2'' long) Imported. |
#57MINI |
$0.0700 |
 |
Dimensions: 1-1/16'' overall length - 7/32'' x 13/16'' long tenon, with 7/32'' Long x 3/8" Wide (head). To install this axle peg, drill a 7/32" hole; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the wheel itself, so that the wheel can turn! This axle peg fits wood wheels with a 1/4" hole. Please note: The axle... |
#57SHORT |
$0.0800 |
 |
Dimensions: 13/16" Long x 5/16" Wide x 5/32" Tenon. To install this axle peg, drill a 5/32" hole then put the axle peg thru the wheel; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the wheel itself, so that the wheel can turn!. This axle peg fits wood wheels with a 3/16" hole. New batch, made in Maine |
#58 |
$0.0800 |
 |
Dimensions: 1-1/2" Wide x 3-3/16" Tall x 1/8" Thick. Cut from Plywood. Imported. Limited quantities available. |
#5823 |
$0.0500 |
 |
Dimensions: 7/8" Diameter x 1/4" Thick With a 3/16" Hole. We recommend our model #58 wood axle pegs for this wheel. Hardwood Maple. Made in Maine, USA. |
#59 |
$0.1000 |
 |
Dimensions: 1" Diameter x 3/8" Thick With a 1/4" Hole. We recommend our model # 57 wood axle pegs for this wheel. Hardwood Maple. Made in Maine. USA. |
#60 |
$0.1200 |
.JPG "11\" Birch Wood Furniture Spindle") |
Dimensions: 11" Long x 3/4" Diameter x 1/2" Tenon. (length includes tenons) A great choice for fan braces and running trims. |
#6000 |
$1.0000 |
 |
Sold Individually. Dimensions: 1-1/2" Diameter x 2-3/8" Tall x 5/16" Hole. Base is just under 1-3/8'' in diameter. Hardwood Maple. Imported. |
#6001 |
$1.0500 |
 |
Birch. Imported. |
#6002 |
$0.3200 |
 |
This wheel is 1" in diameter. This wheel is 1/2" thick. This wheel has a 1/4" hole. We recommend our model # 57 wood axle pegs for this wheel. |
#60A |
$0.1500 |
 |
Dimensions: 1" Diameter x 1/4" Thick With a 3/16" Hole. We recommend our model # 58 wood axle pegs for this wheel. Hardwood Maple. Made in Maine, USA. |
#60B |
$0.1200 |
|
This is a Second Quality item, may have minor flaws such as minor roughness, chips, knots, etc. Dimensions: 1" Diameter x 1/4" Thick With a 3/16" Hole. We recommend our model # 58 wood axle pegs for this wheel. Made in Maine! |
#60BS |
$0.0800 |
 |
Dimensions: 1" Diameter x 5/16" Thick With a 1/4" Hole. We recommend our model # 57 wood axle pegs for this wheel. Birch. Imported. |
#60C |
$0.1000 |
 |
We recommend our model # 57 wood axle pegs for this wheel. Made in Maine. |
#60SLAB |
$0.1200 |
 |
Dimensions: 1-1/4" Diameter x 3/8" Thick With a 1/4" Hole. We recommend our model # 57 wood axle pegs for this wheel. Hardwood Maple. Made in Maine, USA. |
#61 |
$0.1600 |
 |
Dimensions: 1-1/4" Diameter x 7/16" Thick With a 1/4" Hole. Made in Maine, USA. |
#61A |
$0.1800 |
 |
1-1/4" Wide x 7/16" Thick with a 1/4" Hole. Made in Maine, USA. |
#61ASLAB |
$0.1800 |
 |
Dimensions: 1-1/2" Diameter x 1/2" Thick With a 1/4" Hole. We recommend our model # 57 wood axle pegs for this wheel. Hardwood Maple. Made in Maine, USA. |
#62 |
$0.2000 |
 |
We recommend our model # 57 wood axle pegs for this wheel. |
#62SLAB |
$0.2200 |
 |
Dimensions: 1-3/4" Diameter x 9/16" Thick With a 1/4" Hole. We recommend our model # 57 wood axle pegs for this wheel. Hardwood Maple. Made in Maine, USA. |
#63 |
$0.3600 |
 |
Dimensions: 2" Diameter x 5/8" Thick With a 1/4" Hole. We recommend our model # 57 wood axle pegs for this wheel. Hardwood Maple. Made in Maine, USA. |
#64 |
$0.4500 |
Displaying 501 to 550 (of 966 Products)
