$0.120
Add:
#1010
Quantity Price Discounts
1-99 $0.120 100-199 $0.090 200-999 $0.080 1,000+ $0.075
$0.150
Add:
#5087
Quantity Price Discounts
1-99 $0.150 100-199 $0.092 200-999 $0.086 1,000+ $0.080
This Mini Round Drawer Pull uses our KS Screws for attachment purposes. The screw is not included. Imported Maple.
$0.100
Add:
#1003
Quantity Price Discounts
1-99 $0.100 100-199 $0.075 200-999 $0.070 1,000+ $0.065
NOTE: The hole goes thru the whole way, not partly thru like most of our Drawer Pulls. You will be screwing this drawer pull onto whatever surface from the top. The screw will be visible from the outside.
$0.300
Add:
#WPKL
Quantity Price Discounts
1-24 $0.300 25-99 $0.260 100-199 $0.210 200+ $0.190
This Small Round Drawer Pull uses our KS Screws for attachment purposes. The screw is not included. Domestic Maple.
$0.160
Add:
#37
Quantity Price Discounts
1-99 $0.160 100-199 $0.118 200-999 $0.108 1,000+ $0.098
Dimensions: 1-1/4" Diameter x 7/8" Tall x 3/16" Hole. Our #KS screw attaches these drawer pulls. The screw is not included. Domestic Maple
$0.200
Add:
#38
Quantity Price Discounts
1-99 $0.200 100-199 $0.160 200-999 $0.145 1,000+ $0.135
Dimensions: 1-1/2" Diameter x 1" Tall x 3/16" Hole. This Medium Round Drawer Pull uses our KS Screws for attachment purposes. The screw is not included. Domestic Maple.
$0.250
Add:
#184
Quantity Price Discounts
1-99 $0.250 100-199 $0.190 200-999 $0.175 1,000+ $0.160
Dimensions: 1-1/2" Diameter x 1" Tall x 7/32" Hole. This Medium Round Drawer Pull uses our KS Screws for attachment purposes.
$0.400
Add:
#184A
Quantity Price Discounts
1-99 $0.400 100-199 $0.300 200-499 $0.280 500+ $0.260
Sold individually, two is shown for details. Dimensions: 1" Square x 13/16" Tall x 13/16" Square Flat Bottom. 3/16" Hole at the bottom. This is a Second Quality item and may have minor flaws - mainly some inconsistency of the corner roundings.
$0.190
Add:
#SQ-KNOB1
Quantity Price Discounts
1-24 $0.190 25-99 $0.150 100-249 $0.117 250-499 $0.110 500-999 $0.103 1,000+ $0.096
Sold individually, two is shown for details. Dimensions: 2" Square x 7/8" Tall with a 1-5/16" square base. 1/16" hole at the bottom. Made in Maine. This is a second quality item, better than usual quality for our seconds.
$0.500
Add:
#SQ-KNOB2
Quantity Price Discounts
1-24 $0.500 25-49 $0.450 50-99 $0.400 100-249 $0.350 250+ $0.300
Sold individually, two is shown for view of details. Dimensions: 1-5/8" Diameter x 1-1/4" Tall x 1" Diameter Flat Bottom. 1/4" Hole. There is a 1" x 1/16" dish at the top. You could use our 1" furniture button to hide the mounting screw or hole if you wish to. This is a Second Quality item and may have minor flaws but is generally in very good shape...
$0.190
Add:
#DRDISH3
Quantity Price Discounts
1-24 $0.190 25-99 $0.150 100-249 $0.117 250-499 $0.110 500-999 $0.103 1,000+ $0.096
Dimensions: 1" Diameter x 13/16" Tall x 13/16" Diameter Flat Bottom. 3/16" Hole at the bottom. This is a Second Quality item and may have minor flaws but is generally in very good shape (better than our usual seconds). Maple or Birch Wood.
$0.190
Add:
#DRAWERP3
Quantity Price Discounts
1-24 $0.190 25-99 $0.150 100-249 $0.117 250-499 $0.110 500-999 $0.103 1,000+ $0.096
This one is unusual that it has a brass threaded hole at the base that takes 8-32 thread machine screws instead of the usual wood screws to install this knob. White paint but needs another coat of white paint to hide minor flaws such as cracking, chips, stains and the like. Or paint a different color, up to you. Dimensions: 1-1/2" Diameter x 1-5/16" Tall x 1"...
$0.250
Add:
#DRAWERWH1
Quantity Price Discounts
1-24 $0.250 25-99 $0.220 100-249 $0.200 250-499 $0.180 500-999 $0.160 1,000+ $0.150
Dimensions: 1-3/16" Diameter x 1-3/16" Tall x 135/16" Diameter Flat Bottom. 3/16" Hole at the bottom. This is a Second Quality item and may have minor flaws but is generally in very good shape (better than our usual seconds). Maple or Birch Wood.
$0.190
Add:
#DRAWERP5
Quantity Price Discounts
1-24 $0.190 25-99 $0.150 100-249 $0.117 250-499 $0.110 500-999 $0.103 1,000+ $0.096
Dimensions: 1-5/16" Diameter x 1-3/8" Tall x 1/2" Diameter Flat Bottom. 1/8" Hole at the bottom. This is a Second Quality item and may have minor flaws. Maple or Birch Wood, varnished.
$0.190
Add:
#DRAWERPV
Quantity Price Discounts
1-24 $0.190 25-99 $0.150 100-249 $0.117 250-499 $0.110 500-999 $0.103 1,000+ $0.096
Dimensions: Slightly over 1-23/32'' (1-3/4'') Diameter x 1-27/32'' Tall with a 1/2'' x 9/16'' Tenon, Height:1-9/32'' Tall (minus tenon). Made in Maine. This is a second quality item.
$0.500
Add:
#KNOB1
Quantity Price Discounts
1-24 $0.500 25-49 $0.450 50-99 $0.400 100-249 $0.350 250+ $0.300
Dimensions: 1-3/4" Diameter x 1" Tall x 3/16" Hole. This Medium Round Drawer Pull uses our KS Screws for attachment purposes. The screw is not included. Holes are slightly undersized. Imported Maple
$0.350
Add:
#39
Quantity Price Discounts
1-99 $0.350 100-199 $0.280 200-999 $0.260 1,000+ $0.240
This is a Second Quality item, may have minor flaws. Dimensions: 1-3/4" Diameter x 1" Tall x 1/8" Hole. Holes are slightly undersized.
$0.250
Add:
#39S
Quantity Price Discounts
1-24 $0.250 25-99 $0.180 100-249 $0.156 250-499 $0.144 500-999 $0.132 1,000+ $0.120
Dimensions: 2" Diameter x 7/8" Tall x 3/16" Hole. This Medium Round Drawer Pull uses our KS Screws for attachment purposes. The screw is not included. Imported Maple.
$0.450
Add:
#40
Quantity Price Discounts
1-99 $0.450 100-199 $0.390 200-499 $0.370 500+ $0.350
Dimensions: 1-1/2" Diameter x 1" Tall x 7/64" (just under 1/8") Hole.
$0.200
Add:
#184CL
Quantity Price Discounts
1-24 $0.200 25-49 $0.150 50-99 $0.120 100-249 $0.095 250-499 $0.085 500+ $0.075
There is a 5/32" x 1" hole drilled in the bottom of this drawer pull. Our #KS screw works with it. The screw is not included.
$0.700
Add:
#DP6
Quantity Price Discounts
1-99 $0.700 100-199 $0.600 200-499 $0.550 500+ $0.500
Dimensions: 2" Long x 5/8" Thick (thickest part). Slot cut into body measures at just under 3/16" Wide. Depth of the slot is 1/4".
$0.100
Add:
#PULL-3
Quantity Price Discounts
1-24 $0.100 25-49 $0.070 50-99 $0.050 100-499 $0.035 500-999 $0.030 1,000+ $0.025
Could be used as a finial. One end (not seen) of this drawer pull has a flush surface, no hole there. Dimensions: 1-1/8" Diameter x 2-1/4" Tall x 3/8" Hole. That 3/8" hole is actually 5/8" at first then narrows to 3/8". Hole depth is 2". Use a 3/8" dowel to attach this drawer pull to your drawers - screws won't work with...
$0.450
Add:
#CAN-DRAWERPULL
Quantity Price Discounts
1-24 $0.450 25-49 $0.300 50-99 $0.270 100-249 $0.250 250-499 $0.230 500+ $0.210
Diameter of flat area is 1/2". Diameter of hole drilled in flat area is 3/16". Uses our #KS Screw . ,or our #KS-1 Screw . The screw is not included.
$0.100
Add:
Max: 8500
#179A
Quantity Price Discounts
1-99 $0.100 100-199 $0.078 200-999 $0.068 1,000+ $0.058
Diameter of flat area is 1/2". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . or our #DES double ended screw for attachment purposes. The screw is not included.
$0.150
Add:
#135A
Quantity Price Discounts
1-99 $0.150 100-199 $0.120 200-999 $0.110 1,000+ $0.098
Diameter of flat area is 13/16". The diameter of the hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . or our #DES double ended screw for attachment purposes. The screw is not included.
$0.250
Add:
#152A
Quantity Price Discounts
1-99 $0.250 100-199 $0.200 200-999 $0.180 1,000+ $0.160
Diameter of flat area is 15/16". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . or our #DES double ended screw for attachment purposes. The screw is not included.
$0.280
Add:
#103A
Quantity Price Discounts
1-99 $0.280 100-199 $0.240 200-999 $0.220 1,000+ $0.200
Diameter of flat area is 7/8". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . or our #DES double ended screw for attachment purposes. The screw is not included.
$0.550
Add:
#69
Quantity Price Discounts
1-99 $0.550 100-199 $0.490 200-499 $0.450 500+ $0.410
Diameter of flat area is 1-1/4". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . or our #DES double ended screw for attachment purposes. The screw is not included. Made in Maine!
$0.550
Add:
#104A
Quantity Price Discounts
1-99 $0.550 100-199 $0.500 200-499 $0.450 500+ $0.400
Diameter of flat area is 1-1/4". Diameter of hole drilled in flat area is 3/16". To install this ball knob we recommend our #KS screw . or our #DES double ended screw for attachment purposes. The screw is not included.
$1.400
Add:
#73
Quantity Price Discounts
1-24 $1.400 25-99 $1.300 100-199 $1.250 200+ $1.200
Diameter of flat area is 1". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend our #KS screw . , or our DES double ended screw for attachment purposes. The screw is not included. Made in Maine!
$1.750
Add:
#105A
Quantity Price Discounts
1-24 $1.750 25-99 $1.600 100-199 $1.500 200+ $1.400
Diameter of flat area is 1-1/2". Diameter of hole drilled in flat area is 3/16". To install this ball knob, we recommend this screw . , or our #DES double ended screw for attachment purposes. The screw is not included.
$3.000
Add:
#128A
Quantity Price Discounts
1-24 $3.000 25-99 $2.800 100-199 $2.600 200+ $2.400