Axles

Axle pegs - For use with our wooden wheels.

Also... see our Hubcaps category or Dowel Caps category if you want to make your own custom axles!

Displaying 1 to 9 (of 9 Products)
  Item Name- Model Price
Wood Axle Peg - Fits Wheels with a 3/16" Hole
Wood Axle Peg - Fits Wheels with a 3/16" Hole
Dimensions: 13/16" Long x 5/16" Wide x 5/32" Tenon.  To install this axle peg, drill a 5/32" hole then put the axle peg thru the wheel; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the wheel itself, so that the wheel can turn!. This axle peg fits wood wheels with a 3/16" hole.  New batch, made in Maine

Qty Discounts New Price
25+
Save 20%
100+
Save 52%
200+
Save 55%

 #58 $0.1000
Add:
Wood Axle Peg - Fits Wheels with a 7/32" Shaft
Wood Axle Peg - Fits Wheels with a 7/32" Shaft
Dimensions: 11/16" Long x 3/8" Wide (at the head) x 7/32" Tenon. Axle Shaft length = 15/32'' (a little under 1/2'' long) Imported.

Qty Discounts New Price
25+
Save 20%
100+
Save 42%
200+
Save 46%

 #57MINI $0.1000
Add:
Wood Axle Peg - Fits Wheels with a 1/4" Hole
Wood Axle Peg - Fits Wheels with a 1/4" Hole
Dimensions: 1-1/16'' overall length - 7/32'' x 13/16'' long tenon, with 7/32'' Long x 3/8" Wide (head). To install this axle peg, drill a 7/32" hole; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the wheel itself, so that the wheel can turn! This axle peg fits wood wheels with a 1/4" hole. Please note: The axle...

Qty Discounts New Price
12+
Save 20%
50+
Save 30%
100+
Save 41%

 #57SHORT $0.1000
Add:
Wood Axle Peg - Fits Wheels with a 1/4" Hole
Wood Axle Peg - Fits Wheels with a 1/4" Hole
Dimensions: 1-3/8" Long (overall) with a 3/8" wide head.  Axle shaft is 7/32" diameter x 1-7/32'' in Length.  To install this axle peg, drill a 7/32" hole (or a 15/64" hole -15/64'' will give you a little more "wiggle room" for glue) for proper fit then put the axle peg thru the wheel, then dip the axle peg tip (already through the wheel) into some glue (not the whole thing),...

Qty Discounts New Price
12+
Save 33%
50+
Save 47%
100+
Save 62%

 #57 $0.1500
Add:
Wood Axle Peg - Fits Wheels with a 3/8" Hole
Wood Axle Peg - Fits Wheels with a 3/8" Hole
Dimensions: 1-5/8" Long x 1/2" Wide (head) with a 5/16" Diameter Tenon.  Tenon length 1-9/16".  Assembly Tip: To install this axle peg, drill a 5/16" hole then put the axle peg thru the wheel; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the wheel itself, so that the wheel can turn! This axle peg fits...

Qty Discounts New Price
25+
Save 30%
100+
Save 44%
200+
Save 48%

 #56 $0.2000
Add:
"Dooley" Wood Axle Peg - Fits Wheels with a 3/8" Hole
"Dooley" Wood Axle Peg - Fits Wheels with a 3/8" Hole
Dimensions: 2-5/8" Long x 1/2" Wide (head) with an 11/32" x 2-5/16" Tenon. This axle is often used with our "Dooley" Treaded Wheels.  Some use the term "Dually" instead of "Dooley"...   To install this axle peg, drill a 11/32" hole then put the axle peg thru the wheel; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue...

Qty Discounts New Price
12+
Save 36%
100+
Save 42%
200+
Save 45%

 #1004 $0.2500
Add:
Wood Axle Peg - Fits Wheels with a 3/8" Hole
Wood Axle Peg - Fits Wheels with a 3/8" Hole
This axle does NOT fit our dual treaded wheels - it's a bit too short for the axle end to stay attached to the body of your toy truck... Dimensions: 1-13/16" Long Overall (excluding head, 1-5/8" long) x 1/2" Wide x 11/32" Tenon - Fits 3/8" Hole. Tenon length 1-9/16".  To install this axle peg, drill a 11/32" hole then put the axle peg thru the wheel: then dip the axle peg tip (already...

Qty Discounts New Price
12+
Save 25%
100+
Save 46%
200+
Save 49%

 #1004A $0.2000
Add:
Wood Axle Peg - Fits Wheels with a 3/8" Hole
Wood Axle Peg - Fits Wheels with a 3/8" Hole
Length Overall = 1-5/8'', Axle Shaft 1-3/8'', Axle Shaft Width 11/32'' Head Diameter = 1/2'', Head Thickness = 1/4'' Good for single treaded wheels applications. Imported.  To install this axle peg, drill a 11/32" hole then put the axle peg thru the wheel; then dip the axle peg tip (already through the wheel) into some glue (not the whole thing), taking care that no glue touches the...

Qty Discounts New Price
12+
Save 30%
100+
Save 48%
200+
Save 51%

 #1004B $0.2000
Add:
Mini Wood Smokestack (Could also be used as an axle...)
Mini Wood Smokestack (Could also be used as an axle...)
This is actually meant for wood toy trains but can be used as an axle peg!  This mini smokestack will fit wheels with 1/4" holes - will be a tight fit.  You may need to drill out your wheel holes slightly or sand this mini smokestack a bit.  The thick end provides a nice flourish compared to our other wood axle pegs.   Dimensions: 5/8" Diameter x 1-1/2" Long x 1/4" Tenon.

Qty Discounts New Price
25+
Save 20%
100+
Save 34%
200+
Save 37%

 #25 $0.1500
Add:
Displaying 1 to 9 (of 9 Products)

  • About Us


    Founded in 1985 with a particular focus on wood products. We sell almost anything you can imagine in wood. We work closely with mills in Maine. Look for "Made in Maine" for these wood products milled in Maine.
     

    FREE SHIPPING: Free shipping to all lower 48 U.S. States for orders over $75. Extra fees apply for other areas. 

     

    30 DAYS RETURN POLICY. 100% return back guarantee.


  • Contact Us


    • Call Us : 1-800-452-2739
    Email Us : [email protected]
    Fax : 207-882-6554
    300 Birch Point Road Wiscasset, ME 04578
    (mailing address: PO Box 365, Woolwich, ME 04579)

    payment-image



Copyright © 2025 Casey's Wood Product, Inc.. Powered by Zen Cart